DxTO-MOTION
Mobile phone with emergency call button and movement sensor

Description

The DxTO-MOTION mobile phone is a normal GSM mobile phone (GSM 900/1800) with an additional dead man's control, an integrated emergency call button and a movement respectively speed-up sensor. The release of the alert through the dead man's control takes place with the movement respectively speeding up of the telephone. The alert notification takes place via SMS at a pre-determined central-station or another mobile-participant.
Additionally to the SMS, a voice communication can be produced automatically to another participant. The time up to the release of the alert is configurable (in limits), through which unintended alert-notifications can be avoided.
The DxCALL, with which text-messages can be forwarded at individuals or person-groups, serves as central-station for example. Method's DxCALL, routine-messages can be controlled in a certain time-interval. Furthermore, messages can be recorded on a printer.
The integrated emergency call button is used for the automatical establishment of a voice connection. Beside the dead man's control with it automatically a willingly-independent alarm is caused, the device contains a caliper, with which a willingly-dependent alarm can be caused manually.
An alert is caused with absence of the Reset-Signals.
The locating of the phone takes place by means of the built-in GPS-receivers. On this occasion it is to be heeded however that the GPS-receiving must be guaranteed that is called, it must pass a view-connection to the sky. In closed rooms or buildings, the GPS-receive is given not therefore in general. In the alert-case, the last recorded position is sent via SMS.
The precision of the GPS-position locating depends on the reception. It amounts to 50 meters normally approximately. The battery-lifespan amounts according to operating mode to 8 - 36 hours.
The evaluation of the GPS-Data can take place with DxCALL for example and is referred via email at standard-programs like for example Map&Guide. The lengths - and width-data are transmitted with it. The GPS-Data can be visualized through it in a map. To the orientation inside closed buildings, we offer you in the framework of the SYS-CARE (only in german) solution the broadcast DxPS and the receiver DxPR.


Options
  • Movement-sensor with alert-release at recumbent position, (gas-sensor)


  • Areas of application
  • Rescue services e.g. fire department
  • Navy
  • Agriculture and Forestry
  • Medical institutions
  •  
    back on top
     

    Accessory

    Desktop Charger
  • to attach e.g. to a desktop
  • with additional links for the data read-out
  • Waistbelt Bags
    Holders
     
     
    back on top
     

    Related Links